1. Center REDIBASE over tube
2. Push REDIBASE down over tube to ground
3. Lift tube to allow flap side tabs to snap under tube bottom
4. Snug tube down into side tabs and apply 4 - 5 passes of duct tape
   (8 - 10 feet tape per footing)

For 12" tubes, score and snap every 2nd flap (it doesn’t matter if they break off) then follow above procedure.

For extra long lengths of tube

• Hold tube between knees
  at an angle to the ground
  
  
• Center REDIBASE with bottom
  edge of tube top
  
  
• Pull REDIBASE up and over
  tube with ‘swift’ motion.
  
  Extreme cold: Apply heat to unit to soften plastic.
  (in field, vehicle exhaust can be used)

Keep away from children